<tr id="dkg6b"><label id="dkg6b"></label></tr>

    <td id="dkg6b"></td>

    <table id="dkg6b"><ruby id="dkg6b"></ruby></table>
    1. <table id="dkg6b"></table>

      <td id="dkg6b"><strike id="dkg6b"></strike></td>

      <table id="dkg6b"></table>

      <tr id="dkg6b"><s id="dkg6b"><menu id="dkg6b"></menu></s></tr>

      How to clean stainless steel faucet

      2018-08-30 649
      1. Before the faucet of the device, it is required to flush the water, wash the impurities in the water pipe, remove the debris in the hole of the device, and try to clean the faucet after the completion of the painting project. Cover it with a cloth.
      2, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the outside, to avoid damage to the appearance of sand.
      3, switch faucet should not use too much force, the trend can be quietly scrolling, especially do not use the handle as a handrail to support or use.
      4. The faucet should be wiped regularly to prevent the watermark from leaving after the water drops.
                       Guangdong stainless steel faucet
      5, the shower head metal hose of the bathtub faucet should adhere to the natural stretch state, do not coil it on the faucet when not in use. Together, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
      6. When the water volume becomes smaller after using for a period of time, please pay attention to cleaning the filter.
      7. The stainless steel faucet is mainly sanding. The sanding surface can be sanded with scouring pad. This is not the same as the general copper faucet. Even if the faucet is scratched, the same can be corrected with scouring pad. If the faucet has rust spots formed by other reasons, it can be corrected by the same method.
      8, stainless steel faucet cleaning tips, squeeze a little toothpaste on the stainless steel faucet, then use a toothbrush to quietly rinse, rinse with water, use an old stockings that are not needed to light, and then use orange peel to play on the metal surface (Because orange peel contains fruit acid to maintain stainless steel jewelry), it can be bright.
      Recommended news